簡介

GO2cam 不斷發展以滿足業界需求並與全球趨勢保持一致。 自動化 GO2cam 的自動化是這項演變的重要組成部分，旨在自動化零件加工編程流程，使其更高效、更易於使用，從而大幅縮短編程時間。

多年來，此自動化功能已在先前版本中逐步開發，並針對特定流程進行逐步更新，其方式如下：

  • 自動識別形狀以應用加工循環。

  • 自動選擇刀具和切削條件。

  • 自動應用刀具路徑以加工零件。

1

It started with the introduction of HMF in V5.5 - allowing the automatic recognition of holes and assigning standard hole parameters or User-defined parameters to them, to then be automatically machined.

2

The concept of 操作清單 was then introduced in V5.6 - allowing to define or capture from an existing file, and save, a list of machining operations. These cycles can then be loaded and applied on another part by only selecting the profiles. (Further conditions can also be defined in the opelist to automate the profile recognition process). 線切割放電加工策略 are directly based on Opelists but includes specific options and behaviour.

3

自動車床操作清單 was then introduced in V6.06 - this allows to define an opelist for turning which is able to automatically recognize the features of the part and apply the machining cycles on it. The whole process is reduced to a few clicks.

4

特徵 用於 銑削 已在 V6.10 版本中推出 - 這允許辨識 稜柱形特徵 在零件上自動應用操作清單以加工特徵。

5

New611.png

從 V6.11 版本開始， 加工特徵 功能已進一步改進，將所有先前的自動化選項整合到單一窗口中。此功能現可應用於 車銑複合 parts allowing the recognition of the various topologies of the part and automatically machining it with the applicable opelists.

Evolution of automation.PNG