循環： 輪廓加工、輪廓再加工、開槽、倒角、錐度切割

定義

進刀點和退刀點與刀具路徑起點之間進刀和退刀運動的定義。

提供三種可能性：

  • 銑削高度

  • 高度+安全距離

  • 直接XYZ

銑削高度

The tool goes first to the point located at the milling altitude.
Then, it moves following X and Y axis to join the starting point of the toolpath.
If a tool compensation is defined, it is taken during the horizontal movement.

高度+安全距離

The tool moves first horizontally following X and Y axis.
If a tool compensation is defined, it is taken during this horizontal movement.
Then, it goes down to the milling altitude and starts the toolpath.

直接XYZ

The tool directly goes to the starting point of the machining, combinating the X, Y and Z axis movements.
If a tool compensation is defined, it is taken during this movement.