정의

이 상자를 사용하면 공구 접근 방식을 빠른 속도로 조절할 수 있습니다.

A. Leadin angle
B. Leadin length
C. Leadout angle
D. Leadout length

A. 리드인 각도

Leadin angle together with leadin length define the leadin movement of the tool in feed rate. This movement is necessary for the tool to take its diameter compensation ( G41 or G42 ). The value of the leadin angle is between 0 and 90 degrees.
It is the leadin angle value of the tool. If the offset or the Toolpath is at the Left or to the Right, the angle is given in absolute value relative to the first element.
If there is no offset (center position) and if the toolpath is in Part position, the angle is given in absolute value according to the counterclockwise circle.
The length is given by the leadin length.

B. 리드인 길이

리드인 길이의 값은 공구 반지름보다 커야 합니다. 이 값은 X 또는 Y가 아닌 각도선을 기반으로 합니다.

C. 리드아웃 각도

Like leadin angle and length, leadout angle together with leadout length define the leadout movement. This movement is necessary to cancel the diameter compensation of the tool. The value of the leadout angle is between 0 and 90 degrees.
It is the leadout angle value of the tool. If the offset or the toolpath is at the Left or to the Right, the angle is given in absolute value relative to the first element.
If there is no offset (center position) and if the toolpath is in Part position, the angle is given in absolute value according to the counterclockwise circle.
The length is given by the leadout length.

D. 리드아웃 길이

리드아웃 길이의 값은 공구 반지름보다 커야 합니다. 이 값은 X 또는 Y가 아닌 각도선을 기반으로 합니다.