定義

このボックスを使用すると、高速で工具のアプローチを調整できます。

A. Leadin angle
B. Leadin length
C. Leadout angle
D. Leadout length

A. 導入角度

Leadin angle together with leadin length define the leadin movement of the tool in feed rate. This movement is necessary for the tool to take its diameter compensation ( G41 or G42 ). The value of the leadin angle is between 0 and 90 degrees.
It is the leadin angle value of the tool. If the offset or the Toolpath is at the Left or to the Right, the angle is given in absolute value relative to the first element.
If there is no offset (center position) and if the toolpath is in Part position, the angle is given in absolute value according to the counterclockwise circle.
The length is given by the leadin length.

B. 導入長さ

導入長さの値は、工具の半径よりも大きくする必要があります。この値は、XまたはYではなく、角度線に基づいています。

C. 逃げ角度

Like leadin angle and length, leadout angle together with leadout length define the leadout movement. This movement is necessary to cancel the diameter compensation of the tool. The value of the leadout angle is between 0 and 90 degrees.
It is the leadout angle value of the tool. If the offset or the toolpath is at the Left or to the Right, the angle is given in absolute value relative to the first element.
If there is no offset (center position) and if the toolpath is in Part position, the angle is given in absolute value according to the counterclockwise circle.
The length is given by the leadout length.

D. 逃げ長さ

逃げ長さの値は、工具の半径よりも大きくする必要があります。この値は、XまたはYではなく、角度線に基づいています。